Tektronix phaser 350 manual

You may need to run the cleaning cycle one or two more times to completely clear a plugged jet. If the ink jet is still plugged after several purges, turn the printer off for at least 12 hours and allow the ink to solidify. Turning the printer on again after it has completely cooled down automatically purges ink and often clears the debris plugging a jet.

Skip to main content Click to view our Accessibility Statement or contact us with accessibility-related questions. What have I forgotten? This document has step-by-step instructions with example screen displays to help you get everything set up correctly. AUTO for Automatic language selection the printer automatically senses the language of the print job and processes it accordingly. Refer to the PhaserPrint 2. Q: Why don't the printed colors match the screen colors?

Because monitors and printers use different color-generation models, color matching between the two is difficult. This causes, for example, blues to be brighter on the screen than on the printed page. These color corrections use two different algorithms to solve this color-mapping problem.

Print the RGB. This file is a chart that gives a good representation of the colors possible on the printer.

This chart gives RGB-percentage values with each color printed, which you can use with almost any software application to remove the guesswork between matching RGB-monitor colors and the CMYK-printer colors.

Configure features to match the installed options on the printer. Scroll bars for additional options and features are on the left.

If the list does not display proper features, the driver may not have been installed properly. EXE driver for your printer and reinstall it. From the main screen, press Menu once. Scroll three times to the left using the arrow keys on the LCD. Press Menu twice. Scroll once to the right. Press the Menu key once. At this point, you can change the IP address.

Click Increment to change the numeric value. Click Shift to change the number being edited. Click Done when you are done editing the IP address. Click Confirm when asked to confirm your changes. If you want to abort this change, click Exit. Scroll once to Network Mask. Press the Menu button. Enter the Network Mask. Press Done and Confirm when done. The printer computes split subnets, also. A: Follow these instructions for removing a paper jam. Often you can prevent paper jams by following a few basic guidelines.

If the jam persists, try cleaning the printer. Phaser X. Support Home Page. Join Us Close. Join Tek-Tips Forums! Join Us! By joining you are opting in to receive e-mail. Promoting, selling, recruiting, coursework and thesis posting is forbidden. Students Click Here. I have a Tektronix Phaser and that are quite sick the cycles but never actually finishes warm up, the gives error code 04, Does anyone oput there have a service manual online that I can reference to try and fix?.

Regards, Zoran. Check the DM cam, solenoid,clutch, home sensor and related hardware. Red Flag This Post Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Close Box.